AirSlax 5 Base – for scanning Wi-Fi networks {Latest}
AirSlax Base – for scanning Wi-Fi networks {Latest}
AirSlax – designed for scanning and further use of Wi-Fi networks.
This program is designed to scan and further use of Wi-Fi networks. It features: when running scans all available channels ether, finds and catches the purpose disables client and analyzing data, selects a password, stores the results.
Moreover, the utility gives you the ability to hack into the network with both encryption methods – WEP and WPA. In addition able to find the access point authentication WPS Protocol and to pick up the Pin. This version is actually a Live USB/CD with the operating system on an entry for the kernel.
Its capabilities: when it starts, it scans all possible channels of the broadcast, finds and intercepts the target, disconnects the client and, analyzing data, selects the password, saves the results.
Moreover, the utility allows you to hack networks with both encryption methods – WEP and WPA. In addition, it is able to find access points with authorization using the WPS protocol and pick up a Pin-code. This version is in fact a Live USB / CD with the operating system on the Linux kernel.
The program menu is quite simple:
- 1. Scan air: If you select this menu item, it scans the available Wi-Fi networks and clients connected to them.
- 2. Select a target: Here you can select a target for an attack from the list of networks received earlier.
- 3. Target Interception: There is an interception of packets coming from / to the selected Wi-Fi network. You need to wait for the handshake to appear – in the upper right corner the message “WPA HANDSHAKE” appears. This window should not be closed if you need to perform the next item.
- 4. Disable client: Disconnecting a client occurs in order to receive a handshake, since it is transmitted only when connected to a Wi-Fi network. Therefore, when a client is disconnected, menu item 3, Target interception, must be launched.
- 5. WPA Password Selection: After the handshake is caught, you can proceed to the selection of a password using a dictionary. A small dictionary is already in the program, and in order to connect the new ones, you need to copy them to the slaxdict directory on the flash drive.
- 6. Save result: You can save the results of interception, to work with him and further. Results are stored in the slaxchangesdumpresult directory. The file name is formed from the name of the Wi-Fi network and has the extension .cab. ATTENTION: in the CD version, the interception and pickup results (dump folder) are saved to third-party media (/ dev / sda1, in Windows, this is usually the C drive:)
- 7. Selection of the WEP password: Hacking the Wi-Fi network encryption. Prior to launching this item, you must perform the first three menu items and leave the Capture running. Hacking takes about 10 minutes.
- 8. Scan WPS: Scan Wi-Fi networks with authorization using the WPS protocol.
- 9. WPS PIN code selection: WPS PIN code selection takes quite some time – from several hours to several days. However, passwords of any complexity are revealed.
- 10. Auto-selection and interception: This function scans and hacks the Wi-Fi network automatically, but do not abuse it, because it debris on the air.
Installation instructions AirSlax :
- 1. Unpack the program archive on a USB flash drive (2 folders – boot and porteus should appear at the root of the flash drive).
- 2. Go to the boot folder on the flash drive.
- 3. Run the installer for your operating system. If you are creating a USB flash drive from Windows, run Porteus-installer-for-Windows.exe, if from Linux, run Porteus-installer-for-Linux.
- 4. type “ok” and press Enter (protection against accidental launch of the installer is made so that you can once again make sure that you run the installer on the required media). You need to run the installer as an administrator (in Linux as root or with sudo).
This program is designed to scan and further use of Wi-Fi networks. It features: running running running,,, Moreover, the utility gives you the ability to hack into the network with both encryption methods – WEP and WPA. In order to pick up the Pin. This version is actually a USB cable.
The program menu is simple enough:
- 1. Scan ether
- Selecting this menu item.
- 2. Target
- Here you can choose from the list of networks obtained previously.
- 3. The interception target
- Are intercepted packets coming from / to the selected Wi-Fi network. See “WPA HANDSHAKE.” This window should not be closed.
- 4. Disable client
- Disconnecting the Wi-Fi network. Therefore, it is disabling the running item 3 menu – Catching goal.
- 5. Selection of WPA password
- After the handshakes caught, you can proceed with the dictionary. The Slaxdict on the Flashdrive.
- 6. Save the result
- You can save the results of interception, to work with him further. The results are stored in the directory slaxchangesdumpresult. The file name is formed of the Wi-Fi network.
- 7. Password WEP
- 8. Scan WPS
- Scanning Wi-Fi networks with authorization of the WPS Protocol.
- 9. Selection WPS PIN
- Selection pin WPS takes a considerable amount of time – from several times to several days. Nevertheless, the revealed passwords of any component.
- 10. AUTOFIT and interception
- It is not necessary to control your network.
AirSlax Video:
OS: Windows (32/64-bit), Linux
Interface: Russian, English
Medicine: Not required
Size: 198.3 / 327.6 Mb
In case the file is deleted from the file hosting service or the portable program does not perform its functions , leave a comment below. Help others with a choice!
You can download AirSlax from the link below…
